Sawing off Teflon angle holding screw
2 inch sliding element
45 degree adjustment hole
Angle installed
Assembled sliding element
Compare 45 deg incline to the mild incline
Disassembled element with fasteners 2
Disassembled element with fasteners
Drill quarter inch holes in Teflon
Drilling 3 16th holes
Sliding element
Inside square tube
Mark pilot holes in Teflon
Marking pilot holes
New sliding element with mild adjustment inclines
Screw sawed off
Screws sawed off
Sliding element - bearings and Teflon
Sliding element inside
Teflon angle snaps into place
Teflon holding screw
Teflon to be cut into 2 three quarter pieces
Threading hole for Teflon angle holding screw
Threading Teflon holding screw
Worked with flat needle file
Working another side with needle file
Spread the angle legs
Teflon angle holding screw
Sketchup - sliding element
Basic sliding element
